荥阳小蜜蜂游乐设备厂以诚信经营为经营理念，经营各种游乐游乐设备，款式新颖，价格实惠，质量可靠，深受新老客户的一致好评，游乐设备，被誉为诚信经营的好厂家，好服务，好厂家，荥阳小蜜蜂游乐设备厂是你经营游乐设备的理想厂家，欢迎新老客户前来我厂考察，洽谈

迷你飞车主要技术参数：

整机尺寸：L6xW4xH2米

乘员人数：8人

功 率：2.5Kw

工作电源：50Hz/380v

运行速度：1.98m/s

占地面积：9x6米

Place the center frame on the floor， then connect the bottom of the center frame with the expansion wire and the ground.

Prepare two layers of scaffolding， and then the umbrella on the scaffolding， small head outward，绥德新型游乐设备， the bulk of the place to the inside， and then the umbrella frame marked on the central frame label corresponding， and then fixed with 18 * 100 screws.。

Will be installed to connect the umbrella frame connected to the picture， the red circle for the rod connection position， in the side the bottom of the umbrella frame， rod for the square steel， with 16 * 80 screws.

Connect the installed boom to the cockpit， place the cockpit under the boom， and then drag the cockpit， passing the lower end of the boom through the center of the cockpit screw hole， and then through the cockpit's boom end with a flower-type screw fixed.

The central decoration will be installed in the center frame，商洛新型游乐设备， the first center of the glass will be placed on both sides of the central frame， and then the general center of the decorative drag and the central disc height consistent， and then the center of the upper end of the umbrella and umbrella with 12 * 50 screws， And then the lower part of the connection with the central plate connection， the other general decoration in the same way the same way to install，米脂新型游乐设备， two central decorative installation， the two between the decoration with 12 * 50 screws， a total of eight screws.

。Will be installed on the umbrella and umbrella frame above the umbrella stand first placed on the scaffolding， and then stand flat on the side of the umbrella stand， and then fixed with a self-tapping， an average of 20 cm a screw to prevent decoration Tilt， and then use the same method will be the other half of the umbrella fixed.

8.将中心顶放置在脚手架上，然后将中心顶吊起，移动至设备正中心顶部，然后将中心顶缓慢放下，然后将中心点插入中心的连接孔内。Place the top of the center on the scaffolding， then lift the center top， move it to the bottom of the center of the machine， and then slowly lower it， insert the center top into the center hole， and pull the wires on the center frame out of the machine's running radius 3 m position， and then connect the control box row position. Specific connection method security control box internal instructions.

9.然后将中心架上的电线组拉出设备运行半径三米位置 ，然后连接控制箱端子排位置。（ 具体接线方法按控制箱内部说明）。

小蜜蜂游乐设备厂为你介绍桑巴气球安装步骤