Place the center frame on the floor， then connect the bottom of the center frame with the expansion wire and the ground.

Prepare two layers of scaffolding， and then the umbrella on the scaffolding， small head outward， the bulk of the place to the inside， and then the umbrella frame marked on the central frame label corresponding， and then fixed with 18 * 100 screws.。

Will be installed to connect the umbrella frame connected to the picture， the red circle for the rod connection position， in the side the bottom of the umbrella frame， rod for the square steel， with 16 * 80 screws.

Connect the installed boom to the cockpit， place the cockpit under the boom， and then drag the cockpit， passing the lower end of the boom through the center of the cockpit screw hole， and then through the cockpit's boom end with a flower-type screw fixed.

The central decoration will be installed in the center frame， the first center of the glass will be placed on both sides of the central frame， and then the general center of the decorative drag and the central disc height consistent， and then the center of the upper end of the umbrella and umbrella with 12 * 50 screws， And then the lower part of the connection with the central plate connection， the other general decoration in the same way the same way to install， two central decorative installation， the two between the decoration with 12 * 50 screws， a total of eight screws.

。Will be installed on the umbrella and umbrella frame above the umbrella stand first placed on the scaffolding， and then stand flat on the side of the umbrella stand， and then fixed with a self-tapping， an average of 20 cm a screw to prevent decoration Tilt， and then use the same method will be the other half of the umbrella fixed.

8.将中心顶放置在脚手架上，然后将中心顶吊起，荆州新型游乐设备，移动至设备正中心顶部，然后将中心顶缓慢放下，然后将中心点插入中心的连接孔内。Place the top of the center on the scaffolding， then lift the center top， move it to the bottom of the center of the machine， and then slowly lower it， insert the center top into the center hole，宜昌新型游乐设备， and pull the wires on the center frame out of the machine's running radius 3 m position， and then connect the control box row position. Specific connection method security control box internal instructions.

9.然后将中心架上的电线组拉出设备运行半径三米位置 ，然后连接控制箱端子排位置。（ 具体接线方法按控制箱内部说明）。

小蜜蜂游乐设备厂为你介绍桑巴气球安装步骤

荥阳小蜜蜂淘气堡详细说明 淘气堡是根据儿童特征设计的，通过科学的立体组合形成一个 淘气堡是根据儿童特征设计的，通过科学的立体组合形成一个集游乐、运动、益智、健身为一体的新一代少年儿童活动中心。它是 集游乐、运动、益智、健身为一体的新一代少年儿童活动中心。它是 一座新型的、综合性极强的儿童乐园，是针对儿童喜欢的钻、爬、滑、综 是 爬 滑 一座新型的、 合性极强的儿童乐园， 针对儿童喜欢的钻、 、 、 滚、晃、荡、跳、摇等特点设计的。淘气堡的随意性无动力这两大特 滚、晃、荡、跳、摇等特点设计的。淘气堡的随意性无动力这两大特点，也是深受买家欢迎的因素。随意性指的是它不受场地的限制，无 点，游乐设备，也是深受买家欢迎的因素。随意性指的是它不受场地的限制，无 论是室内、室外，还是不规则的场地，均能安装淘气堡。论是室内、室外，还是不规则的场地，均能安装淘气堡。 可根据条件定做。 可根据条件定做。 适用范围:学校、幼儿园、花园、别墅、公园、物业小区、游乐适用范围:学校、幼儿园、花园、别墅、公园、物业小区、游乐 场、少年宫、商场、超市等各类室内外场所供小朋友游玩。场、少年宫、商场、超市等各类室内外场所供小朋友游玩。 荥阳小蜜蜂游乐设备厂专业游乐设备厂商，规格齐全，品优优 荥阳小蜜蜂游乐设备厂专业游乐设备厂商，规格齐全，咸宁新型游乐设备，品优优 良，真诚为您服务！欢迎选购！ 良，真诚为您服务！欢迎选购