郑州小蜜蜂游乐设备厂新型游乐设备、儿童游乐设备、游乐园设备、机械设备加工、户外大型游乐设备的产品保证及售后和安装统一介绍：

你们的产品质量有保障吗？

答：我们的产品均可以出口，所有产品都是按照出口的质量标准生产。我们公司产品已通过在质量、安全、环保上认证。

产品保修政策是怎么样？

答：只要不是人为操作造成埙坏，实行整体保修一年，在保修期内除了电机保修半年（因为电机厂家给我们也是保修半年），我们可提供原厂零部件， 儿童升降转椅游乐设备，平时的维护（换螺丝保养等）维修有你在当地解决。

 这款我不喜欢，有没有其他造型，或者价位的选择吗？能定制吗？

答：有。可以进入本站产品中心，另外，工厂可根据客户要求订制，如可以增加或减去配置.变换颜色等满足客户个性化需求。

如何按装

答：一般简单的设备我们尽量建议客户自行按装，因为如果我们按排人员上门按装会增加客户费用的，儿童蹦极游乐设备，一般我们会委派一到两名按装人员上门按装设备，客户只要管我们工作人员的吃和住就可以了，一般一到两天可以完工

Place the center frame on the floor， then connect the bottom of the center frame with the expansion wire and the ground.

Prepare two layers of scaffolding， and then the umbrella on the scaffolding， small head outward，游乐设备， the bulk of the place to the inside， and then the umbrella frame marked on the central frame label corresponding，排排坐游乐设备， and then fixed with 18 * 100 screws.。

Will be installed to connect the umbrella frame connected to the picture， the red circle for the rod connection position， in the side the bottom of the umbrella frame， rod for the square steel， with 16 * 80 screws.

Connect the installed boom to the cockpit， place the cockpit under the boom， and then drag the cockpit， passing the lower end of the boom through the center of the cockpit screw hole， and then through the cockpit's boom end with a flower-type screw fixed.

The central decoration will be installed in the center frame， the first center of the glass will be placed on both sides of the central frame， and then the general center of the decorative drag and the central disc height consistent， and then the center of the upper end of the umbrella and umbrella with 12 * 50 screws， And then the lower part of the connection with the central plate connection， the other general decoration in the same way the same way to install， two central decorative installation， the two between the decoration with 12 * 50 screws， a total of eight screws.

。Will be installed on the umbrella and umbrella frame above the umbrella stand first placed on the scaffolding， and then stand flat on the side of the umbrella stand， and then fixed with a self-tapping， an average of 20 cm a screw to prevent decoration Tilt， and then use the same method will be the other half of the umbrella fixed.

8.将中心顶放置在脚手架上，然后将中心顶吊起，移动至设备正中心顶部，然后将中心顶缓慢放下，然后将中心点插入中心的连接孔内。Place the top of the center on the scaffolding， then lift the center top， move it to the bottom of the center of the machine， and then slowly lower it， insert the center top into the center hole， and pull the wires on the center frame out of the machine's running radius 3 m position， and then connect the control box row position. Specific connection method security control box internal instructions.

9.然后将中心架上的电线组拉出设备运行半径三米位置 ，然后连接控制箱端子排位置。（ 具体接线方法按控制箱内部说明）。

小蜜蜂游乐设备厂为你介绍桑巴气球安装步骤